Our flakes are a true automotive polyester flake, designed for exterior application, cut from metallized polyester film brilliant, transparent, light fast, water and solvent resistant.
The versatile and brilliant dimensional pigment just lights up in sunlight, they can be used in normal automotive applications as well as in casting resins, gelcoats and even in powder coating applications.
Add these flakes to the following..
Clear Coat - remember you must put additional clear coat only over the top to "bury" and protect the flake. Click here to go to our 2k Show Clear
Transparent Binder also known as Transparent Base or Intercoat Clear or Flake Carrier Click here to go the flake carriers and intercoat clears
You can also apply these flakes dry to a wet clear coat.
Metal Flake Guide...
- Ultra Small 0.002 (50 micron) Ultra Micro Flake lays down exceptionally easy apply with any spray gun or airbrush .35mm upwards
- Small 0.004 (100 micron) Micro Flake is relatively easy to apply with a minimum spraygun nozzle size of 1.3mm and an airbrush .5mm upwards
- Medium 0.008 (200 micron) Medium Flake is relatively easy to apply with a minimum spraygun nozzle size of 1.5mm not suitable for airbrushes
- Large 0.015 (375 micron) Standard Flake can be applied with a convetional spraygun or a dry flake gun with a minimum nozzle size of 1.8 mm not suitable for airbrushes.
NOTE: The smaller the flake the more dense the flakes are, so it looks like you've got less than other size flakes.
